Chemical Feed Solutions Ltd Chemical Feed
Solutions

Particle Counter - ParticleSense,CounterSense


The Particle Counter range from Pi gives you a world’s first. The first particle counters to allow multiple sensors on a single analyser. The CounterSense is a sophisticated particle counter with the capability to size and count particles from 2 to 125 microns, the FilterSense has the capability to size and count particles from 2-50 microns, and the ParticleSense is a standalone counter with the capability of counting and sizing particles from 2-125 microns.

The range of sensors are available with different controllers giving you the same great performance with different communication, display, and control options. With the Pi range of particle counters, you get everything that you need – and nothing that you don’t, without sacrificing the quality of measurement. Each sensor comes with a ‘clean me’ alert and can be run with a constant head weir or a flow meter, to maintain a constant flow.

Principle of Operation

As particles in a water stream pass through a measurement cell they break a laser beam inside the particle analyser. This break is measured by a detector opposite the laser beam and the number of breaks is equal to the number of particles and the size of signal (created as the particle passes through the beam) is proportional to the size of the particle. The Pi particle analysers are unique in the marketplace in that they allow:

  • Simple user calibration
  • Set up direct from the instrument (no software/PC required)
  • Multiple sensor capability (can be combined with other sensors such as UV254, Turbidity, etc.)
  • Control with PID functions based on particle counts
  • Multipoint capability

Applications

The most common application for a Pi particle counter is in water treatment and the optimization or ongoing monitoring of filter effluent.

The CounterSense can be coupled with turbidity and differential pressure sensors and offers on-board PID control of automatic backwash and can provide data logging and optionally remote access via the mobile phone network such that you can have your filtration expert in your plant wherever they are in the world. The CounterSense is possibly the most advanced on-line particle analyser in the world.

The FilterSense is designed for multipoint monitoring of filter banks, lowering the cost per point with up to 15 particle analyser sensors.

Other applications for Pi particle counters include:

  • Simple user calibration
  • Set up direct from the instrument (no software/PC required)
  • Multiple sensor capability (can be combined with other sensors such as UV254, Turbidity, etc.)
  • Control with PID functions based on particle counts
  • Multipoint capability


TOP

 
Chemical Feed Solutions Ltd
6a Enterprise Drive Henderson Auckland

PO Box 104-055, Lincoln North, Waitakere 0654
Phone: 09-837-6075
Fax: 09-837-6075
E-mail: enquiries@chemfeed.co.nz
Get in Touch
 
Master Electricians

Chemical Feed Solutions is a member of the Electrical Contractors Association of New Zealand